Removing and Installing the Lithium-Ion Batteries (Model 04590) (continued)
7. Install the batteries in reverse order.
8. Tighten the battery clamp nuts from
2.8 to 3.9 N·m (25 to 35 in-lb)
.
9. Connect the positive (+) battery cable at the center mounted batteries, and at
each set of side mounted batteries; refer to
Figure 94
.
10. Tighten the battery cable fasteners from
8.5 to 9.5 N·m (75 to 85 in-lb)
, then
apply battery terminal protector Toro Part No. 107-0392 or a light layer of
grease to the battery terminals and cable connectors to reduce corrosion.
11. Install the side mounted battery covers.
Greensmaster® eTriFlex 3360 and 3370
Page 5–119
Electrical System: Batteries (Model 04590)
19239SL Rev B
