Reel Assembly
g285181
Figure 157
1.
Crossmember
8.
Cap screw (2 each)
15.
Crosslink
2.
Side plate – LH
9.
Side plate – RH
16.
Electric motor adapter
3.
Flange head screw (2 each)
10.
Counterweight
17.
Socket head screw (2 each)
4.
Shoulder bolt (4 each)
11.
Hex nut (4 each)
18.
Motor clamp
5.
Flange nut (4 each)
12.
O-ring (2 each)
19.
Cap screw (2 each)
6.
Reel assembly
13.
Grass shield
20.
Counterweight
7.
Pitch arm (2 each)
14.
Flat wire spring
Removal of the cutting reel requires removal of the left or right side plate from
the cutting unit frame. The opposite side plate does not have to be removed from
the frame to service the cutting reel.
Removing the Reel Assembly
Refer to
for this procedure.
1. Remove the cutting unit from the machine and place the cutting unit on a
flat work surface.
DPA Cutting Units: Service and Repairs
Page 7–14
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
