General Information
Cutting Unit Operator's Manual
The
Cutting Unit Operator’s Manual
provides information regarding the operation,
general maintenance, and maintenance intervals for the cutting units on your
machine. Additionally, if optional kits have been installed on the cutting units
(e.g. groomer or rear roller brush), the
Installation Instructions
for the kit includes
set-up, operation and maintenance information. Refer to the
Cutting Unit
Operator’s Manual
and the kit
Installation Instructions
for additional information
when servicing the cutting units.
Supporting the Cutting Unit when Servicing
g284040
Figure 147
1.
Bedbar adjuster screws
2.
Support
Whenever the cutting unit has to be tipped to expose the bedknife or cutting reel,
support the rear of the cutting unit making sure the back of the bedbar adjuster
screws are not resting on the work surface.
DPA Cutting Units: General Information
Page 7–2
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
