Installing the Fuel Tank (continued)
5. Check the fuel tank position and adjust if necessary:
A. Install and lower the hood.
B. The fuel tank should be aligned (square) with the front edge of the hood.
C. Loosen the fuel tank clamps and adjust the tank position if necessary.
D. Ensure the engine does not contact the back of the fuel tank and tighten
the fuel tank clamp fasteners.
6. Fill the fuel tank with fuel and open the fuel shut-off valve.
7. Connect the 48V battery disconnect.
8. Start the engine and check the fuel system for leaks. Repair any leaks as
necessary before returning the machine to service.
Checking the Fuel Lines and Connections
g286482
Figure 10
(shown with evaporative control system removed)
1.
Fuel shut-off valve
3.
Fuel pump
2.
Fuel filter
4.
Clamp
Check the fuel lines and connections at the scheduled maintenance intervals
recommended in the
Traction Unit Operator's Manual
. Check the lines for
deterioration, damage, leaks, or loose connections. Replace the hoses, clamps,
and fittings as necessary.
Greensmaster® eTriFlex 3360 and 3370
Page 4–5
Engine (Model 04580): Service and Repairs
19239SL Rev B
