Servicing the Rear Wheel Gear Box (continued)
7. Remove the rear traction motor if necessary; refer to
(Optional) (page 5–133)
.
8. Inspect and replace all of the gear box components as necessary. Ensure all
bearings are pressed fully against their respective shoulders.
9. Assemble the gear box in reverse order. Use a new axle shaft seal and
housing gasket. Tighten the gear box cover fasteners in a crossing pattern
to
15 N·m (11 ft-lb)
.
Greensmaster® eTriFlex 3360 and 3370
Page 6–21
Chassis: Service and Repairs
19239SL Rev B
