Cooling System
g286401
Figure 12
1.
Screen guard
4.
Air ducts (in hood)
2.
Rotating screen (under screen guard)
5.
Air duct screen (in hood)
3.
Blower housing
IMPORTANT
The engine that powers the eTriFlex model 04580 machine is air-
cooled. Operating the engine with dirty or plugged cooling fins, a
blocked screen guard or rotating screen, a plugged or dirty blower
housing, or plugged intake screens or ducts in the hood may result
in the engine overheating and cause engine damage.
To ensure proper engine cooling, make sure the screen guard, rotating screen,
cooling fins and other external surfaces of the engine are kept clean at all times.
Perform the following maintenance procedure at the interval specified in the
traction unit
Operator’s Manual
.
1. Park the machine on a level surface, lower the cutting units, shut off the
engine, remove the key from the key switch and unplug the 48V battery
disconnect.
Engine (Model 04580): Service and Repairs
Page 4–8
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
