Removing the Gear Box Assembly (continued)
9. Rest the handle of the pry bar against the front roller and turn the drive shaft
counterclockwise to loosen it from the reel. Continue to unscrew the drive
shaft and remove the gear box from the cutting unit.
10. If the hex head on the end of the drive shaft is damaged during removal:
A. Remove the drain/fill plug and drain the oil from the gear box.
g285845
Figure 180
1.
Socket head screw (4 each)
8.
Sun gear
2.
Gear box cover assembly
9.
Planet gear (3 each)
3.
Cover gasket
10.
Flange bushing (3 each)
4.
Driven gear
11.
Retaining ring
5.
Thrust washer
12.
Gear box housing assembly
6.
Ring gear
13.
Damaged drive shaft
7.
Flange bushing
B. Remove the 4 socket-head screws and remove the gear box cover
assembly and driven gear. Remove and discard the cover gasket.
C. Slide the thrust washer, ring gear and bushing from the gear box housing.
D. Slide the sun gear, and planet gears and bushings from the pins on the
gear box housing.
E. Remove the retaining ring from the drive shaft.
F. Slide the groomer housing assembly from the drive shaft.
G. Tip up the cutting unit to access the bottom of the reel to remove the
drive shaft assembly.
Universal Groomer (Optional): Service and Repairs
Page 8–6
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
