Installing the Idler Assembly (continued)
B. Press the bearing into the idler arm so that the bearing contacts the
shoulder in idler arm bore and install the bearing retaining ring.
C. Install the bearing shields with the flocked side of the shield toward the
bearing.
D. Insert the stub shaft through the shields and bearing. Use the through
hole in the shaft to prevent the shaft from rotating and tighten the flange
nut from
37 to 45 N∙m (27 to 33 ft-lb)
.
E. If the collar was removed from the idler arm, install the collar and tighten
from
33 to 41 N∙m (24 to 30 ft-lb)
.
2. Fit a new O-ring to the motor adapter.
3. Apply anti-seize lubricant to the outside diameter of the motor adapter and
position the idler arm over the adapter.
4. Use new lock nuts and secure the motor adapter and idler arm to the cutting
unit side plate.
5. Install the clevis pin and a new cotter pin to secure the height adjustment rod
to the front of the idler arm.
Greensmaster® eTriFlex 3360 and 3370
Page 8–13
Universal Groomer (Optional): Service and Repairs
19239SL Rev B
