General Operation Problems (Model 04580)
Many aspects of machine and component operation are visible using the InfoCenter; refer to
InfoCenter Display for Troubleshooting (page 3–39)
. Machine faults may also appear on the InfoCenter
display to assist in troubleshooting.
Problem
Possible Cause
Corrective Action
A fuse or the circuit wiring is damaged.
Test the 15A fuse located in fuse holder
1 under the right side cover.
Test the 7.5A fuse located in fuse
holder 2 under the right side cover.
The key switch or circuit wiring is
damaged.
Test the key switch.
The battery cables are corroded or
damage. Clean, repair, or replace the
cables as necessary.
Nothing happens when the key switch
is set to the O
N
position
The 12V AGM battery is discharged or
damaged.
Charge the battery and replace if
necessary.
The fuel level is low.
Fill the fuel tank.
The fuel pump is damaged.
Test the fuel pump; refer to the
Kawasaki engine Service Manual.
A fuel hose is restricted or damaged.
Repair, or replace the fuel hoses
necessary.
The fuel solenoid or circuit wiring is
damaged.
Test the fuel solenoid; refer to the
Kawasaki engine Service Manual.
The engine cranks but does not start.
The engine relay or circuit wiring is
damaged (ignition circuit remains
grounded).
Test the engine relay and replace if
necessary.
Troubleshooting: General Operation Problems (Model
Page 3–42
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
