Service and Repairs
Bedbar Assembly
g285020
Figure 150
1.
Bedbar assembly
5.
Plastic washer (4 each)
9.
Nylon bushing (2 each)
2.
Washer (2 each)
6.
Bedbar pivot bolt (2 each)
10.
Rubber bushing (2 each)
3.
Compression spring (2 each)
7.
Lock nut (2 each)
4.
Lock nut (2 each)
8.
Metal washer (2 each)
Removing the Bedbar
Refer to
for this procedure.
1. Remove the cutting unit from the machine and place the cutting unit on a
flat work surface.
2. Loosen the lock nuts (item 4) on the end of each bedbar adjuster screw
until the washers (item 2) are loose.
DPA Cutting Units: Service and Repairs
Page 7–6
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
