Removing and Installing the Lithium-Ion Batteries (Model 04590) (continued)
g310850
Figure 97
1.
Lock nut (6 each)
9.
Carriage bolt (4 each)
17.
Battery support (2 each)
2.
Battery clamp rod (2 each)
10.
Controller bracket
18.
Negative (-) battery cable (3 each)
3.
Flat washer (2 each)
11.
Lock nut (3 each)
19.
Carriage bolt (3 each)
4.
Jam nut (4 each)
12.
T6: Precharge controller
20.
Battery retainer
5.
Battery (4 each)
13.
Hex nut (10 each)
21.
Battery tray
6.
Positive (+) battery cable (3 each)
14.
Foam strip (2 each)
22.
Foam strip (2 each)
7.
Positive (+) battery cable
15.
Washer (10 each)
8.
SC8: Lithium-Ion battery controller
(BMS)
16.
Negative (-) battery cable
IMPORTANT
Pay close attention to the battery orientation during installation.
Install the right side mounted batteries with the positive (+) terminals
rearward. Install the left side mounted batteries with the positive
(+) terminals forward. Install the center mounted batteries with the
positive (+) terminals upward. Refer to
Figure 95
and
Figure 97
for
additional information.
Electrical System: Batteries (Model 04590)
Page 5–118
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
