21
Preparation
Notes
• If the tube holder comes off, follow the procedure below to attach it.
• When inserting the notch of the tube holder into the hole on the rear side, insert while pulling the tube holder towards the rear
side. Forcibly inserting into the hole may cause damage to the notch.
2) Insert the notch of the Upper tube
holder into the back hole on the
pump upstream side.
• The Upper tube holder is firmly
fixed to the pump.
1) Hook the hole of the Upper tube
holder to the notch on the pump
upstream side.
Upper tube holder
Check
• The Lower tube holder is firmly
fixed to the pump.
Lower tube holder
Check
1) Insert the notch of the
Lower tube holder into
the front hole on the
pump downstream side.
2) Insert the notch of the Lower
tube holder into the back hole
on the pump downstream side.