3
Purpose and Overview
The TERUFUSION Infusion Pump Type LF3 is intended for the infusion of general and local anesthetics, vasodilators, cardiotonics,
parenteral feeding, chemotherapy medications, anti-cancer drugs, labor-inducing drugs and anti-coagulants at ICU, CCU, NICU,
operating rooms or general wards.
This equipment is intended for continuous intravenous delivery of medications (such as drug solutions) at a specified hourly rate of
flow. This equipment adopts the peristaltic finger technology.
Model
Catalogue number
Communication function
Hereinafter referred to as
TE-LF630
TE
*
LF630Nxx
―
TE-LF630
TE
*
LF632Nxx
RS-232C
TE-LF632
Alphanumeric characters are entered for x in the catalogue number.
Features
Tube pressure applying system
• When the door is opened, the tube clamp automatically closes the tube to prevent an inadvertent excessive infusion.
Secure tube attachment
• The AIS (Anti Irregular Set) system makes it difficult to close the door if the tube has not been placed correctly. The tube guide
helps in positioning the tubing correctly.
Easy-to-read display
• With a 4.3 inch (10.9 cm) colour LCD, clear and precise visibility has been achieved.
• The operation indicator allows the operation/stop/alarm status to be easily recognised.
• The internal battery charge and level indicator is displayed on the LCD with 5 bars.
Wide range of alarm functions
• Provided with Battery alarm, Shutdown Notice alarm, Power Failure alarm, Air-in-line alarm, Upper Occlusion alarm, Lower
Occlusion alarm, Nearly Empty alarm, Door alarm, Flow Rate Abnormality alarm, Infusion Completion alarm (the keep vein open
(KVO) function continues solution delivery at 3.00 mL/h (when 20 drop/mL) or 1.00 mL/h (when 60 drop/mL)), Re-alarm, Start
Reminder, Free Flow alarm, Line Empty alarm, No Flow Rate alarm, No VTBI alarm and Flow Rate/VTBI (Volume to be infused)
Volume Judgment alarm.
• The Flow Rate/VTBI Volume Judgment alarm works as a safety function to prevent the normal mode operation if the flow rate is
equal to or more than the VTBI.
• The Air-in-line alarm and Occlusion alarm detection sensitivity level can be changed according to the condition of use. The Air-
in-line alarm can also issue an alarm if accumulated microbubbles exceed a certain value within 15 minutes. (Special function:
Default is OFF)
Additional safety functions
• The keypad lock function disables any switch operations after being set to prevent any operational errors or inadvertent
operations. (Except for Start switch, Power switch and Back/Mute switch (for operation to release the keypad lock).)
User-friendly shape and structure
• With a unit weight of approx. 2.0 kg, the carrying burden is reduced, and allows for stable installation with the pole clamp
included.
• The rubber door seal seals the main unit and the door, providing protection from infiltration of drug solution.
• The rounded-cornered body is easy to clean even when drug solution has adhered.
Dual power supply system
• Dual power supply system with AC power and internal battery.
• The internal battery can provide approx. 5 hours of continuous operation for solution delivery at a flow rate of 25 mL/h at ambient
temperature of 25°C, with a fully-charged new battery.
• The internal battery can be charged to approx. 80% in 3 hours.
• The sub-battery is used for a Power Failure alarm in case both power supplies are lost.
External signal processing (TE-LF632 only)
• External communication (RS-232C) allows communication with an external device.
Purpose, Overview and Features of the Product
