Terumo TE LF630N Instruction Manual Download Page 222

Page: 222 / 238

104

Troubleshooting



Display

Occurrence

Cause

Action

• The LCD is dim.

• The equipment is operated

using the internal battery

• The equipment is in the night

mode. (When the night mode
is enabled)

• The brightness becomes two levels lower during

internal battery operation or night mode operation.

• If it is not the case, contact TERUMO trained service

technicians.

• The keypad lock icon

displayed.

• The keypad lock is on.

• Press and hold the Back/Mute switch for 2 seconds or

more to release the keypad lock.

• Displays are irregular and the

buzzer sounds.

• The pump is defective.

• Contact TERUMO trained service technicians to

request repair.

• The power turns off

unexpectedly.

• The pump is defective.

• Contact TERUMO trained service technicians to

request repair.



Failure

Drip Sensor Dislocation error

Occurrence

Cause

Action

• LCD: The Drip Sensor

Dislocation error display
flashes red.

• Operation indicator: Lights up

red

• Buzzer: Activates.
• Pump: Stops.

• The drip sensor is not

connected to the main unit.

• Turn off the power and connect the drip sensor.
• If the problem persists, the set may be defective.

Contact TERUMO trained service technicians.

• The drip sensor is internally

disconnected.

• Contact TERUMO trained service technicians.

Other

Occurrence

Cause

Action

• “E*” is displayed, the operation

indicator lights up red and
the buzzer sounds. (* is
alphanumeric characters.)

• The pump is defective.

• Turn off the power and contact TERUMO trained

service technicians to request repair.

Summary of Contents for TE LF630N















































































































































































































































Search results

Summary of Contents for TE LF630N

Reviews:

Related manuals for TE LF630N

Brands by name

Popular brands

Terumo TE LF630N, Instruction Manual

Search results

Summary of Contents for TE LF630N

Reviews:

Related manuals for TE LF630N

Brands by name

Popular brands