Tecnoalarm TP8-64 BUS, Installer Manual

Page: 164 / 246

Programming by console Installer Manual - TP8-64 BUS
5-26
Prog.emer.SMS
Waiting
Prog.emer.SMS
Completed
Mobile 9
Prog.SMS heading
Prog.SMS heading
Waiting
Prog.SMS heading
Completed
WARNING
The emergency SMS message can have a maximum length of 80 characters.
All further characters will be cut off.
WARNING
The heading of the SMS message can have a maximum length of 40 characters.
All further characters will be cut off.
z
Enabl.emer.SMS Permits the transmission of a preset SMS message instead
of a vocal emergency call.
[ # ]
Emergency SMS enabled
z
Prog.emer.SMS Permits programming of the emergency SMS by means of
an external mobile phone (see § 5.14.5.2).
z
Prog.SMS heading Permits programming of a header of the SMS messages by
means of an external mobile phone (see § 5.14.5.3).
z
Enab. digit Permits enabling of the digital data channel (not to be used
if the GSM telephone communicator is used as a back up
device).
[ # ]
Digital data channel enabled
5.14.5.1 PROGRAMMING OF THE EMERGENCY NUMBER
The telephone communicator with GSM module constantly communicates via RS485
serial bus with the control panel. If communication fails for more than 30 seconds
(serial bus not connected or defect), the emergency call is made transmitting the
emergency message selected (from 1 to 4) to the telephone number programmed.
The emergency number can be composed of max. 15 digits.
Commands available
+
yw
to delete an existing number
+
#*
to insert the DTMF symbols #(hash) and *(star)
+
MEM to insert a pause
+
0
...
9
to enter the value
+
EXIT to accept programming and quit the submenu
5.14.5.2 PROGRAMMING OF THE EMERGENCY SMS
Using an external mobile telephone it is possible to program the text of the emergency
SMS and send it to the number of the SIM card of the GSM telephone communicator
TECNOCELL-PRO PL.
RECEPTION OF THE EMERGENCY SMS
Press the hash key
#
YES to put the control panel into the reception mode. On the
display of the console is viewed Waiting .
On reception of the emergency SMS, on display of the console is viewed Completed .
The emergency SMS has been stored.
Commands available
+
#
YES to start the reception
+
EXIT to accept programming and quit the submenu
5.14.5.3 PROGRAMMING OF THE SMS HEADING
Using an external mobile telephone it is possible to program the text of the SMS
heading and send it to the number of the SIM card of the GSM telephone
communicator TECNOCELL-PRO PL.
RECEPTION OF THE SMS HEADING
Press the hash key
#
YES to put the control panel into the reception mode. On the
display of the console is viewed Waiting .
On reception of the SMS heading, on display of the console is viewed Completed .
The SMS heading has been stored.
Commands available
+
#
YES to start the reception
+
EXIT to accept programming and quit the submenu
Mobile 9
Prog.SMS heading
Mobile 10
Enab.digit [ ]
Mobile 7
Enab.emer.SMS [ ]
Mobile 8
Prog.emer.SMS