Tecnoalarm TP8-64 BUS, Installer Manual

Page: 147 / 246

TP8-64 BUS - Installer Manual Programming by console
5-9
MENU
2 2
2 2 2
z
Supervision
disarming
The control panel does not control if the console is
functioning or transmitting. In this case supervision alarm is
never released.
z
Learning The wireless console for being recognized by the control
panel must be learnt beforehand (see § 5.3.7).
Viewing of the current settings
[ ] No wireless console associated
No wireless console has been associated yet to the position selected (1...4).
[ # ] Console associated
A wireless console has already been associated to this position.
5.4.3 PROGRAMMING OF THE SERIAL NUMBER OF THE
CONTROL PANEL
The serial number of the control panel is used in every communication with the sirens
and the wireless receivers-transmitters. It is to avoid interferences with other wireless
systems placed near TP8-64 BUS.
Commands available
+
#
to learn the wireless siren/console selected
+
*
to delete the wireless sirens/console selected
+
EXIT to confirm the selection and quit
5.5 CLOCK SETTING
+
yw
to select the menu (2)
+
#
YES to confirm the selection
All the scheduled processes use the internal clock as a time base.
Commands available
+
yw
to select the item to be filled in
+
0
...
9
to enter the values
+
EXIT to accept programming and quit the submenu
WARNING
The serial number is programmed by default. It is reported on the label (barcode) inside the control
panel casing. The congruence between the serial number of the control panel and that of the
wireless siren must always be maintained. If the wireless siren or the contro panel is replaced, the
siren must be learnt or the serial number of the control panel programmed again.
Console 01 1
Learn [ # ]
Wireless 3
Sn. Ctrl panel
Menu 2
Clock
Tue 19 JUN 07
Work. 10:45