Tecnoalarm TP8-64 BUS, Installer Manual

Page: 40 / 246

Input expansion modules Installer Manual - TP8-64 BUS
2A-8
2A.4.2 LA MORSETTIERA
2A.4.2 TERMINALS
WARNING
The jumper W1 must be connected on the last device of the serial bus RS485 only.
The input expansion SPEED 8 STD does
NOT control devices connected via zone bus (e.g.
WINBEAM/S or DOORBEAM/S).
Te rm ina l De scription Type
Z1
W ired zone 1 Input
COM Common input Output
Z2 W ired zone 2 Input
+
Positive voltage Output
-
GND (detector power supply) -
Z3 W ired zone 3 Input
COM Common input Output
Z4 W ired zone 4 Input
+
Positive voltage Output
-
GND (detector power supply) -
Z5 W ired zone 5 Input
COM Common input Output
Z6
W ired zone 6 Input
+
Positive voltage Output
- GND (detector power supply) -
Z7 W ired zone 7 Input
COM Common input Output
Z8
W ired zone 8 Input
+
Positive voltage Output
- GND (detector power supply) -
-
Output
+
Output
A
B
* NC (0 Ohm ) - NA (supe rior to 2000 Ohm ) - BIL (2000...4000 Ohm ) - B24 (2000…4000 Ohm )
GND (earth)
13.8V DC
NC / NA / BIL / B24
13.8V DC
GND (earth)
NC / NA / BIL / B24
13.8V DC
NC / NA / BIL / B24
GND (earth)
Input/output sta tus
13.8V DC
NC / NA / BIL / B24
13.8V DC
GND (earth)
NC / NA / BIL / B24
NC / NA / BIL / B24
13.8V DC
NC / NA / BIL / B24
13.8V DC
13.8V DC
GND (earth)
NC / NA / BIL / B24
13.8V DC
RS485 serial bus
Input
Output
RS485 serial bus
RS485 se ria l bus
RS485 serial bus power supply