Tecnoalarm TP8-64 BUS, Installer Manual

Page: 13 / 246

TP8-64 BUS - Installer Manual General features
1-1
1. GENERAL FEATURES
TP8-64 BUS is a wired control panel with optional radio expansion.
TP8-64 controls a minimum of 8 and a maximum of 64 zones, distributed among the CPU board, the internal expansion
module with 4 inputs, the input expansion modules connected via serial line or the optional radio module.
In addition, the control panel provides a serial bus for the connection of the RSC devices (serial devices connected via
bus).
Using the optional wireless modules, it is possible to connect the wireless devices, bidirectional sirens and LCD
consoles, working on the frequencies 433MHz et 868MHz.
Two versions of TP8-64 BUS control panel are available:
z
TP8-64 BUS control panel in ABS casing design by
z
TP8-64 BUS MET control panel in a metal casing
1.1 HARDWARE
POWER SUPPLY
z
2A switching power supply TP8-64 BUS - 3A switching power supply TP8-64 BUS MET
z
Separately mounted transformer
CASING
z
ABS casing TP8-64 BUS - Size (L x H x D): 300 x 390 x 100mm
Metal casing TP8-64 BUS MET - Size (L x H x D): 455 x 365 x 110mm
z
Battery bay (12V - 7Ah)
INPUTS
z
Maximum 64 zone inputs:
• On the CPU board
ƒ
1 high speed SERIAL BUS connector for the connection of expansions modules, consoles, keypads,
LED signaling panels, key readers, etc
ƒ
1 high speed SERIAL BUS connector for the connection of the RSC sirens with specific power supply for
recharge battery
ƒ
4 SENSOR BUS connectors for the connection of max. 8 RSC detectors
• Internal expansion modules
ƒ
4 wired inputs with RDV filter of the optional internal expansion module (optional)
ƒ
14 wired input expansion modules connected via serial bus (optional):
ƒ
modules with 8 inputs and 1.8A power supply (SPEED ALM8 PL)
ƒ
modules with 8 inputs (SPEED 8)
ƒ
modules with 4 inputs (SPEED 4)
ƒ
modules with 8 inputs (SPEED 8 STD)
The modules of the series SPEED PLUS control both RDV detectors and programmable barriers as well as the
RSC peripherals:
ƒ
modules with 8 SENSOR BUS inputs (SPEED 8 PLUS)
ƒ
modules with 4 SENSOR BUS inputs + 4 standard inputs (SPEED 4 PLUS)
ƒ
modules with 8 SENSOR BUS inputs and 1.8A power supply (SPEED ALM8 PLUS)
• 32 wireless inputs(optional transmitter/receiver module) to be selected among 2 modules connected via serial bus:
ƒ
RTX200/433868
ƒ
RX300/433868
OUTPUTS
z
On the CPU board
• Programmable logic outputs OUT1+ and OUT2- (one positive, the other negative)
• Relay output for indoor sirens (self-powered and non)
• Relay output for outdoor sirens
z
Max. 32 LED signaling panels with 32 LED or expansion modules with 32 logic outputs:
• 32 logic open-collector outputs
(ESP32-OCN)
• 32 LED outputs (SINOTTICO 32N)
CONTROL UNITS
z
Max. 15 LCD consoles for monitoring and programming connected via serial bus (LCD300/S)
z
Max. 15 secondary control units:
• Key interface
(TP SKN)
• Electronic keypad (TP SDN)
• Key reader with mini keypad (TP SK6N)
GSM INTERFACE
z
1 telephone communicator with GSM data module connected via serial bus (TECNOCELL-PRO PL)