Tecnoalarm TP8-64 BUS, Installer Manual

Page: 59 / 246

TP8-64 BUS - Installer Manual Keypoints
2D-1
2D. KEYPOINTS
TP8-64 BUS can be controlled by a total of 15 keypoints.
Among the keypoints count all the secondary control units, i.e.:
z
Electronic keypad TP SDN
z
Reader of electronic keys with mini keypad TP SK6N
z
Interface for electronic keys TP SKN
2D.1 TP SDN ELECTRONIC KEYPAD
The electronic keypad TP SDN permits arming/disarming and viewing of the status of the first 4 programs with code.
It does not accept the installer code and does not permit programming.
TP SDN is composed of a metal keypad and an electronic board attached on the rear. It has to be connected via
serial bus RS485.
WARNING
If all the LED are blinking, the serial bus is missing or connected incorrectly.