Tecnoalarm TP8-64 BUS, Installer Manual

Page: 113 / 246

TP8-64 BUS - Installer Manual Programming by PC
4-19
z
Enabling of the data channel
Never use the GSM telephone communicator as backup channel (protocol 176-188)
Once you have finished the configuration of the GSM telephone communicator, press:
z
OK to confirm and quit
z
Abandon to quit without saving
4.2.3 REPORT CODES
Clicking on Report codes , on the screen is viewed:
The report codes are sent by the control panel during digital calls in order to identify the alarm or signaling in course
of transmission. Every operating condition (see table of report codes) is identified by a proper 2-digits hexadecimal
code (00...FF).
EVENT-CHANNEL ASSOCIATION
To associate a detemined event to a telephone channel
check the item of the corresponding event line level with
the channel column. If you wish to associate the
complete range of possible events to a channel click on
the channel letter. All the items of the column will be
automatically selected.
REPORT CODE ASSOCATION
It is possible to define or change the report code by
clicking on the arrow next to the report code box and
selecting the value requested. The value selected is
shown in the report code box.
If the alarm or event to be defined is not viewed, click on
the scroll bar and move downwards until you reach the
requested event.
Once the report codes have been programmed, press:
z
OK to confirm and quit
z
Abandon to quit without saving