Tecnoalarm TP8-64 BUS, Installer Manual

Page: 233 / 246

TP8-64 BUS - Installer Manual Special procedures - Appendix B
B-7
Control panel
z
Click on the Send button in the control panel
environment.
Module
z
Select the module to update.
z
Click on the Send button in the modules
environment.
On the screen is viewed:
z
Insert the CD containing the software and firmware
upgrades.
z
Click on the Abandon button and explore the CD
until you find the directory containing the new
firmware version of the control panel TP8-64 BUS.
On the screen is viewed:
z
Select the corresponding file (tp64bENG_12.bin)
and click on the
Open button.
On the screen is viewed:
In the upper part (floppy disk) of the window, the
name and the version present on the floppy disk are
viewed and in the lower part (board) the firmware
version currently installed on the control panel.
z
Click on the Start button to initiate the
firmware upgrade procedure.
On the screen is viewed:
z
Insert the UPDATE jumper on the CPU board of
the control panel.
On the screen is viewed: