Tecnoalarm TP8-64 BUS, Installer Manual

Page: 141 / 246

TP8-64 BUS - Installer Manual Programming by console
5-3
5.2 PROGRAMMING SEQUENCE
In the following, the recommended sequence of programming is explained. The sequence listed is heartily
recommended as it takes all the necessary functioning parameters into account, yet it is not compulsory.
Control panel section
1) Configuration of the zones (Menu 4) Paragraph 5.3
2) Configuration of the wireless section (Menu 16) Paragraph 5.4
3) Clock setting (Menu 2) Paragraph 5.5
4) Configuration of the programs (Menu 6) Paragraph 5.6
5) Programming of the functions (Menu 5) Paragraph 5.7
6) Programming of the time parameters (Menu 3) Paragraph 5.8
7) Programming of the outputs (Menu 7) Paragraph 5.9
8) Programming of the timers (Menu 9) Paragraph 5.10
9) Programming of the remote controls (Menu 8) Paragraph 5.11
External device section
10) Configuration of the consoles (Menu 15) Paragraph 5.12
11) Configuration of the wireless keys (Menu 13) Paragraph 5.13
Telephone section
12) Programming of the telephone parameters (Menu 10) Paragraph 5.14
13) Association of the events to the channels (Menu 14) Paragraph 5.15
Miscellaneous
14) Programming of the options (Menu 19) Paragraph 5.16
15) Programming of the codes (Menu 11) Paragraph 5.17
16) Programming of the keys (Menu 12) Paragraph 5.18
Other - upon request
17) Activation/deactivation of the remote controls (Menu 1) Paragraph 5.19
18) Module-zone exclusion (Menu 17) Paragraph 5.20
19) Test (Menu 18) Paragraph 5.21
ATTENTION
While a console is in use, all the other consoles of the system are disabled and view Waiting .