Tecnoalarm TP8-64 BUS, Installer Manual

Page: 61 / 246

TP8-64 BUS - Installer Manual Keypoints
2D-3
2D.2.1 FUNCTION KEYS
The keys 1 to 6 permit arming/disarming of 6 programs.
The keys F1 and F3 pressed simultaneously release a panic/hold-up alarm.
The key F1 pressed during the arming phase (zone exclusion time) excludes the open direct zones belonging to the
program being armed.
The key F3 pressed during the arming phase (zone exclusion time) causes the cancellation of arming.
2D.2.2 ELECTRONIC BOARD
The key reader with mini keypad is protected by a combined tamper switch against opening of the casing and
detachment of the casing from the wall by unauthorized personnel.
2D.3 TP SKN KEY INTERFACE
The interface for electronic keys comprises a total of 4 key readers connected via serial bus and permit the control of
the first 3 programs with electronic keys MPKEY. The interface is to be connected via serial bus RS485.