Tecnoalarm TP8-64 BUS, Installer Manual

Page: 14 / 246

General features Installer Manual - TP8-64 BUS
1-2
TELEPHONE SECTION
z
Incorporated telephone interface:
• 8 telephone channels
• 2 call back numbers
z
Transmission of voice messages
• customizable opening message
• complete voice description of the active alarms
z
Digital transmissions using the following formats:
• registered formats: SLOW, DTMF, FSK (CESA, SIA)
• Tecnoalarm formats: FAST (FSK 1200 Baud compatible)
WIRELESS MODULES (OPTIONS) / WIRELESS SECTION
z
Supervision and antimasking control
z
Control of max. 32 wireless devices (detectors, transmitters, contacts...)
z
Control of 4 bidirectional wireless sirens and 4 wireless consoles (individually programmable and supervised)
z
Operating frequency: RX 433MHz, TX 868MHz
z
Wireless receivers and/or receiver-transmitters connected via RS485 serial line
z
Max. 32 wireless keys
z
Compatible with the transmitters of the family TX1xx, TX2xx, TX3xx
PC CONNECTION
z
TTL port for the connection of a PC using the interfaces:
• TTL - RS232
(PROG32)
• RS232 TTL - USB-RS485 (PROG USB)
z
Programming of the system and upgrade of both the firmware and the vocabulary of the control panel
1.2 MAIN FUNCTIONS
z
Access codes:
• 1 master code
• 1 installer code
• Max. 62 user codes (permitting arming/disarming, by-pass)
z
Max. 32 wireless keys
z
Max. 32 user keys (permitting arming/disarming and by-pass)
z
Max. 8 programs
z
1,000 events buffer
z
16 timers (permitting automatic arming/disarming, by-pass/end of by-pass, activation/deactivation remote controls)
z
8 access periods of the codes/keys/wireless key
z
Incorporated vocal interface with pre-recorded vocabulary and answering message programmable by the user
z
Customization of the voice messages
• Recording of the opening message
• Input/program description by vocal messages composed of max. 4 words selected from those prerecorded in the
vocabulary of the control panel
z
Update of the control panel parameters:
• through console with guiding list
• through interface PROG32 or PROG USB
• through TECNOMODEM or MINIMODEM (via telephone line)
z
List of 64 inputs (association of the physical to the logical inputs) in order to increase the versatility and to
obtain the best distribution of the inputs independently from the physical position of the modules.
z
Customizable perpetual biennial calendar (working days, holidays, holiday-eves, summer/winter time)
z
Programming of input parameters (excluded, direct, internal, technical, delayed 1 (entry time 1), delayed 2 (entry
time 2), hold-up, key (arming/disarming of the programs enabled for), tamper)
z
Backup and restore of the radio device data separate from other programming permitting the replacement of
the CPU board without reprogramming of the radio devices
VOICE SYNTHESIS
z
Guided vocal menu for access to the following functions:
• System status signaling
• Program status (armed/disarmed) signaling
• Remote control (remote activation/deactivation)
• Remote digital verification (RDV) of all/a single detector/s
• Programming of the opening message