Tecnoalarm TP8-64 BUS, Installer Manual

Page: 130 / 246

Programming by PC Installer Manual - TP8-64 BUS
4-36
4.5 CONFIGURATION OF THE WIRELESS SIRENS AND CONSOLES
Open the wireless configuration tables by clicking on the
opposite icon.
On the screen is viewed:
4.5.1 WIRELESS SIREN CONFIGURATION
The wireless configuration window permits the configuration of the 4 wireless sirens that can be connected to the
control panel TP8-64 BUS.
For every siren, the following parameters can be programmed:
z
Time parameters (sounding, siren delay, duration flashing light)
z
Functioning (volume of sounding, siren mode)
z
Activation mode (not active, bell, flashing light, siren+flashing light) for alarm, prealarm, signaling or technical
alarm.
PROGRAMMING OF THE TIME PARAMETERS
To program the time parameters click on the items and enter
the time requested:
z
Sounding (mm:ss)
Determines the sounding time in case of alarm.
z
Siren delay (mm:ss)
Determines the interval between the detection of an alarm
and the activation of the siren.
z
Duration flashing light (mm:ss)
Determines the blinking time in case of alarm or
technical alarm.
PROGRAMMING OF THE FUNCTIONAL PARAMETERS
z
Volume signaling/prealarm
To set volume of sounding for prealarm or signaling move
the cursor.
Volume of sounding for alarm is always set
at the maximum.
z
Siren mode
The siren can be programmed so as to work either as
an indoor or an outdoor siren.