Tecnoalarm TP8-64 BUS, Installer Manual

Page: 7 / 246

TP8-64 BUS - Installer Manual Index
3
2G.3.2 Synchronization of the code 2G-5
2G.3.3 Battery 2G-5
2G.4 LCD300 WL WIRELESS CONSOLE 2G-6
2G.4.1 Electronic board 2G-7
2G.4.2 Dip-switch settings 2G-7
2G.5 SAEL 2000 WL WIRELESS SIREN 2G-8
2G.5.1 Battery 2G-8
2G.5.2 Electronic board 2G-9
2G.5.3 Dip-switch settings 2G-9
3. SETUP
3.1 DRAFT OF THE INSTALLATION ON PAPER 3-1
3.2 HARDWARE CONFIGURATION BY PC 3-1
3.2.1 Addition or deletion of modules 3-7
3.3 INSTALLATION 3-10
3.3.1 Connection of the modules via RS485 serial bus 3-10
3.3.2 Connection of the modules on sensor bus and sirens bus 3-11
3.3.3 Programming of the addresses of the modules 3-12
4. PROGRAMMING BY PC
4.1 ZONE CONFIGURATION 4-2
4.1.1 Zone list 4-2
4.1.2 Zone-function association 4-7
4.1.3 Zone-programm association 4-8
4.1.4 Options 4-9
4.1.5 Outputs 4-12
4.1.6 Bus sirens 4-13
4.2 CONFIGURATION OF THE TELEPHONE SECTION 4-15
4.2.1 Telephone interface 4-15
4.2.2 Telephone communicator with GSM module 4-18
4.2.3 Report codes 4-19
4.2.4 Opening message 4-20
4.2.5 Remote control 4-22
4.3 CONFIGURATION OF THE TIME PARAMETERS 4-23
4.3.1 Time parameters 4-23
4.3.2 Timer settings 4-25
4.3.3 Access periods 4-27
4.3.4 Customization of the calendar 4-29
4.4 PROGRAMMING OF THE CODES, KEYS AND WIRELESS KEYS 4-31
4.4.1 Programming of the codes 4-31
4.4.2 Programming of the keys 4-33
4.4.3 Programming of the wireless keys 4-34
4.5 CONFIGURATION OF THE WIRELESS SIRENS AND CONSOLES 4-36
4.5.1 Wireless siren configuration 4-36
4.5.2 Wireless console configuration 4-37
4.6 SYSTEM CONFIGURATION SAVING 4-38
4.7 UPLOAD/DOWNLOAD OF SYSTEM CONFIGURATION 4-39
4.7.1 Connection of the PC to the control panel 4-39
4.7.2 Upload (send) configuration 4-39
4.7.3 Indicators of system configuration coherence 4-42
4.7.4 Download (receive) configuration 4-43
5. PROGRAMMING BY CONSOLE
5.1 PRELIMINARY REMARKS 5-1
5.2 PROGRAMMING SEQUENCE 5-3
5.3 ZONE CONFIGURATION 5-4