Tecnoalarm TP8-64 BUS, Installer Manual

Page: 214 / 246

Technical specifications Installer Manual - TP8-64 BUS
8-8
8.4.5 EXPANSION MODULE WITH 8 SENSOR BUS INPUTS AND POWER SUPPLY
Device: SPEED ALM8 PLUS
Description: Serial input expansion whith 1.8A switching power supply
Number of zones: 8 completely programmable zones for RSC detectors
Outputs: 1 relay output (outdoor siren) - 1 logic output (indoor siren)
2 programmable logic outputs (OUT1+, OUT2-)
Serial bus RS485: 1 serial port RS485 for the connection of the other serial modules
Tamper protection: 1 anti-detachment 1 anti-opening switch
Casing: ABS - Size (L x H x D): 345 x 285 x 90mm
POWER SUPPLY SECTION
Operating voltage: Rated 230V ~ ± 10%, 50Hz, Class 2
Consumption: Max. 200mA
Power supply output:
Module, detectors, battery recharge: Rated 13.8V
Outdoor siren: Rated 14V
Total current available: Max. 1.8A
Current available for:
Module: Max. 80mA
Battery recharge (7Ah): Max. 280mA
Current for indoor siren: Max. 200 mA
Current for siren on Bus (2,1Ah): Max. 100 mA
Current for detectors on Bus: Max. 600 mA
Power supply via serial bus RS485: Max. 500 mA
Logic outputs OUT1 and OUT2: Max. 40mA
Operating temperature: +5°C...+40°C
TRANSFORMER TA14/3
Voltage primary winding: 230V ~ (red)
Voltage secondary winding: 30V ~ / 1.3A (blue)
Frequency: 50/60Hz
Power: 40VA
Class: B
Primary protection fuse: T 200mA
WARNING
The following batteries may be used:
Trade mark:
YUASA
Model: NP 7-12 F.R. (7Ah)
Case flame class: UL94V0
or equivalent batteries with case flame class of UL94V2 or better.