TP8-64 BUS
- Installer Manual
Control by console
6-13
6.6
VIEWING OF THE EVENT BUFFER
The event buffer of the control panel contains the register of all the arming/disarming
and by-pass processes, alarms and modifications of programming etc. It is possible to
consult the event buffer when the control panel is in stanby (date and time viewed)
pressing:
+
MEM
Commands available
+
yw
to select the events
+
EXIT
to quit
Once the event has been selected, on the display are viewed all the information
available:
z
The first line always shows the date and time the event has occurred
z
The second line views in sequence up to 4 parameters, e.g. for access with user
code (master or standard user):
1. Name of the event
2. Code used
3. Device used
For those events causing a telephone call the information available on the telephone
calls are viewed, too:
z
The first line always views the date and time the event has occurred
z
The second line views the issue of the telephone call cycles:
Tel. call
Event with telephone call
Issue call X
Issue of the telephone call cycle of the channel indicated
(X = channel A...H)
1 - [issue]
Issue of the call on the first number associated to the channel
2 - [issue]
Issue of the call on the second number associated to the
channel (see table below)
30/12 14:18:36
Access user
30/12 14:18:36
Master code
30/12 14:18:36
Keypad 1
Viewing
Events
- - -
No call made
Chan. Fault
No call made - telephone section missing
Abt by user
No call made - manual abort by user
No number
No call made - telephone number missing
No tone
No call made - dial tone missing
GSM error
No call made - GSM module fault
Busy
Line busy
No answer
No answer
M. busy
Line busy - GSM
M. no answer No answer - GSM
Answ. ko
Answer without confirmation - no event confirmed
Answ. part
Answer with partial confirmation - not all events confirmed
Answ. ok
Answer with confirmation - all events confirmed
Answer
Answer ok
M. answ. ko
Answer without confirmation - no event confirmed - GSM
ISSUE OF TELEPHONE CALLS
WARNING
The events cannot be deleted from the event buffer.
Summary of Contents for TP8-64 BUS
