Tecnoalarm TP8-64 BUS, Installer Manual

Page: 104 / 246

Programming by PC Installer Manual - TP8-64 BUS
4-10
ALARM OUTPUTS
Permits the association of the programs to the siren and the
programmable logic output for alarm signaling.
Every program can pilot independently:
z
Logic siren 1 to 8
The logic siren is not bound to a physical siren but is
activated under determined conditions. Only in the
programming section of the outputs the logic siren is
associated to a siren (indoor or outdoor) output of one of
the modules connected.
z
Programmable logic output PGM
To associate the output to the programs check the item
beneath the program number.
WIRELESS SECTION
Permits enabling and configuration of the supervision and
antimasking functions:
z
Supervision
A supervision alarm is released if one of the radio devices
does not submit any test transmission for a period superior
to the supervision interval programmed. The supervision
alarm is saved in the event buffer.
•
Signaling for supervision alarm
Permits enabling of alarm signaling on console
(trouble), supervisory board and logic output expansion
boards for supervision alarm.
• Sirens for supervision alarm
Permits enabling of the sirens for supervision alarm.
Siren cut-off is the same as for tamper alarm.
z
Antimasking
A antimasking alarm is released if the receiver detects a
jamming frequency (the same frequency as that of the
radio transmitters of the system) persisting for a period
superior to the antimasking delay programmed. The
antimasking alarm is saved in the event buffer.
•
Signaling for antimasking alarm
Permits enabling of alarm signaling on console
(trouble), supervisory board and logic output expansion
boards for antimasking alarm.
• Sirens for antimasking alarm
Permits enabling of the sirens for antimasking alarm.
Siren cut-off is the same as for tamper alarm.
REPORT VOCAL MESSAGES
Permits enabling of the voice report by the console LCD 300/S
for all system status and alarm signaling.
MODIFICATION OF CODE BY USER
By default the master code is the only one enabled for the
modification of the user codes. If the item is checked the
standard users are enabled for the modification of their proper
code, but cannot view nor modify the other codes.
INVERSION OF DIGITS OF REPORT CODES
Permits the inversion of the report codes to be sent during the
digital transmissions.
To be used only if specifically requested.
LEVEL OF WIRELESS TRANSMISSION
Every level of wireless transmission a different output power of
the wireless receiver-transmitter corresponds to
(RTX200/433868).
WARNING
Prior to setting the level of wireless transmission check for possible output power limitation in your
country