Suzuki Wagon R Plus RB310, Service Manual

Page: 654 / 846

AUTOMATIC TRANSAXLE (M13 ENGINE) 7B1-85
SCAN TOOL DATA DEFINITIONS:
GEAR POSITION
Current gear position computed by throttle position coming from ECM and vehicle speed.
ENGINE SPEED (RPM)
Engine speed computed by reference pulses from crankshaft position sensor.
INPUT SHAFT REVOLUTION (RPM)
Input shaft revolution computed by reference pulses coming from input shaft speed sensor on transaxle case.
OUTPUT SHAFT REVOLUTION (RPM)
Output shaft revolution computed by reference pulses coming from output shaft speed sensor (VSS) on tran-
saxle case.
BATTERY VOLTAGE (V)
Battery voltage read by TCM as analog input signal by TCM.
ATF TEMPERATURE (°C, °F)
ATF temperature decided by signal from transmission fluid temperature sensor installed on valve body.
SHIFT SOLENOID-A COMMAND
ON: ON command being outputted to shift solenoid valve-A (No.1)
OFF: ON command not being outputted to shift solenoid valve-A (No.1)
SHIFT SOLENOID-A MONITOR
ON: Electricity being passed to shift solenoid valve-A (No.1)
OFF: Electricity not being passed to shift solenoid valve-A (No.1)
SHIFT SOLENOID-B COMMAND
ON: On command being outputted to shift solenoid valve-B (No.2)
OFF: ON command not being outputted to shift solenoid valve-B (No.2)
SHIFT SOLENOID-B MONITOR
ON: Electricity being passed to shift solenoid valve-B (No.2)
OFF: Electricity not being passed to shift solenoid valve-B (No.2)
TIMING SOLENOID COMMAND
ON: ON command being outputted to timing solenoid valve
OFF: ON command not being outputted to timing solenoid valve
TIMING SOLENOID MONITOR
ON: Electricity being passed to timing solenoid valve
OFF: Electricity not being passed to timing solenoid valve
TCC SOLENOID COMMAND
ON: ON command being outputted to TCC solenoid valve
OFF: ON command not being outputted to TCC shift solenoid valve
TCC SOLENOID MONITOR
ON: Electricity being passed to TCC solenoid valve
OFF: Electricity not being passed to TCC solenoid valve
PRESSURE CONTROL SOLENOID (%)
Electric current value ratio between electric current value being outputted from TCM to solenoid and maximum
value can be outputted by TCM.
VEHICLE SPEED (KM/H/MPH)
Vehicle speed computed by reference pulse signals coming from vehicle speed sensor on transaxle case.