Suzuki Wagon R Plus RB310, Service Manual

Page: 688 / 846

AUTOMATIC TRANSAXLE (M13 ENGINE) 7B1-119
Part Inspection and Correction Table
Part Inspect for Correction
Casted part, machined part Small flaw, burr Remove with oil stone.
Deep or grooved flaw Replace part.
Clogged fluid passage Clean with air or wire.
Flaw on installing surface, residual gasket Remove with oil stone or replace
part.
Crack Replace part.
Bearing Unsmooth rotation Replace.
Streak, pitting, flaw, crack Replace.
Bushing, thrust washer Flaw, burr, wear, burning Replace.
Oil seal, gasket Flawed or hardened seal ring Replace.
Worn seal ring on its periphery or side Replace.
Piston seal ring, oil seal, gasket, etc. Replace.
Gear Flaw, burr Replace.
Worn gear tooth Replace.
Splined part Burr, flaw, torsion Correct with oil stone or replace.
Snap ring Wear, flaw, distortion Replace.
No interference Replace.
Thread Burr Replace.
Damage Replace.
Spring Settling, sign of burning Replace.
Friction plate Wear, burning, distortion, damaged claw Replace.
Separator plate, retaining plate Wear, burning, distortion, damaged claw Replace.
Sealing surface (where lip con-
tacts) Flaw, rough surface, stepped wear, foreign
material Replace.