Suzuki Wagon R Plus RB310, Service Manual

Page: 132 / 846

FRONT DRIVE SHAFT (G10/M13 ENGINES) 4A-11
3) Install new wheel side boot on shaft temporarily.
4) Apply grease in the supplied parts to the inside of joint hous-
ing.
Grease color: Black
Grease amount: Approx. 70 g (2.5 oz)
5) Fit wheel side boot onto grooves of housing and shaft.
6) Place new wheel side boot big band onto boot putting band
outer end (1) against forward rotation (2) as shown in figure.
7) Fasten wheel side boot big band (1) by drawing hooks (2)
with plier (3) and engage hooks (4) in slot and window (5).
8) Place new wheel side boot small band (1) onto boot putting
band outer end (2) against forward rotation (3) as shown in
figure.
9) Confirm that wheel side boot is not stretched or contracted,
and then fasten boot small band (1) securely using special
tool.
Special tool
(A): 09943-55010