Suzuki Wagon R Plus RB310, Service Manual

Page: 594 / 846

AUTOMATIC TRANSAXLE (M13 ENGINE) 7B1-25
P1701 CAN Communication Problem - TCM
• Throttle opening used for line pressure control is assumed
to be 100%.
• Throttle opening used for gear shifting control is assumed to
be 0%.
• After 15 minutes pass from detecting malfunction, engine
coolant temperature is assumed to be 90°C (194°F).
• Upshifting to O/D is inhibited.
• Lock-up function is inhibited to operate.
• Line pressure control at gear shifting is inhibited.
• Torque reducing request to ECM (torque reduction control)
is inhibited.
• Learning control is inhibited.
• Garage shift control is inhibited.
P1702
Internal Control Module Memory
Check Sum Error
• Power supply for all solenoid valves is cut.
• Gear position is fixed in 3rd gear.
• Line pressure control at gear shifting is inhibited.
• Lock-up function is inhibited to operate.
P1703 CAN Invalid Data- TCM
In case of throttle position signal malfunction:
• Throttle opening used for line pressure control is assumed
to be 100%.
• Throttle opening used for gear shifting control is assumed to
be 0%.
• Upshifting to O/D is inhibited.
• Lock-up function is inhibited to operate.
• Garage shift control is inhibited.
• Learning control is inhibited.
In case of engine coolant temperature signal malfunction:
• After 15 minutes pass from detecting malfunction, engine
coolant temperature is assumed to be normal operating
temperature, and controls of overdrive and lock-up is
released from inhibition.
In case of engine revolution signal malfunction:
• Upshifting to O/D is inhibited.
• Lock-up function is inhibited to operate.
• Line pressure control at gear shifting is inhibited.
• Torque reducing request to ECM (torque reduction control)
is inhibited.
• Garage shift control is inhibited.
• Learning control is inhibited.
P2769 Torque Converter Clutch Circuit Low • Lock-up function is inhibited to operate.
P2770 Torque Converter Clutch Circuit High
• Lock-up function is inhibited to operate.
• Vehicle speed is slower than 15 km/h (9 mile/h), gear posi-
tion is fixed in 1st gear for prevention of engine stall.
DTC
No.
Trouble Area Fail Safe Operation