Medium Optical Disk (RW551/RW552) Library
5–16
EK–MOL80–SV. B01
Reassembly
When replacing the drives, apply pressure sideways to the right at rear of drive.
This depresses the rounding straps located inside the frame and allows the drive
to seat property. When replacing the RFI panel, first thread the SCSI cable back
through the opening.
Slide the base of the panel in first to position tabs in slots on the bottom of the
jukebox chassis. Work the panel into place and secure with two T-20 screws.
Replacing the Interposer PCA
1.
Follow the steps in the service access procedure at the beginning of this
chapter to remove the right access panel.
2.
Disconnect all cables to the PCA.
3.
Remove the six T-20 screws holding the PCA to the chassis.
Figure 5–15 Interposer PCA
Replacing a Cooling Fan
1.
Follow the steps in the service access procedure at the beginning of this
chapter to remove the right access panel.
2.
Disconnect the fan power cable from interposer board.
3.
Remove two T-15 screws holding the fan.
