Chapter 4. Troubleshooting and Diagnostics
EK–MOL80–SV. B01
4–41
You may also use a small flat-head screwdriver with the following dimensions:
Length:
50 mm
Width:
2.45 mm
Thickness:
0.5 mm
A disk can be removed from the drive while the drive is still secured in the
autochanger.
Follow the service access procedures in Chapter 5 to access the
front of the drive mechanism, and then do the following steps to remove a disk
from the drive:
1. Disconnect power to the drive if you have not done so already.
2. Insert the eject tool into the small round hole in the front panel of the drive.
3. Turn the eject tool in a clockwise direction (approximately 20 complete
rotations) until the disk is ejected through the front of the drive.
CAUTION
Do not reach into the drive to get the disk. Wait
until the disk is ejected through the front of the
drive before removing it. Premature removal of the
disk could damage the drive.
