Chapter 3. Product Configuration and Operation
EK–MOL80–SV. B01
3–15
Changing a Configuration Option
1.
With
READY
displayed, press
NEXT
until
ADMIN*
appears in the display
window.
NOTE
A three-part security code is required to
access any options beneath ADMIN. The
security code is set to 0,0,0 at the factory, but
you should encourage the customer to
change this as soon as possible to avoid
access by unauthorized persons.
2.
Press
ENTER
.
CODE 1
and a flashing
0
displays. Press
ENTER
if no
security code has been set, otherwise press
NEXT
until the first number of
the security code displays, and then press
ENTER
. Repeat this step to enter
the next two parts of the security code.
3.
TEST*
displays. Press
NEXT
until
CONFIG
displays, and then press
ENTER
.
The last configuration option that was in the display will show.
4.
Press
NEXT
or
PREV
until the name of the configuration you wish to set
displays and then
ENTER
. Press
CANCEL
to return to
READY.
Table 3–5 Configuration Choices
Configuration Name
Description
RECOVERY ON/OFF
Toggles between ON and OFF. If the configuration is
set to ON, the jukebox will attempt to recover from
any errors encountered; if the configuration is set to
OFF, the jukebox will shut down if an error condition
exists. This configuration should be set to ON under
normal conditions.
SET DEFAULTS
Sets all jukebox configurations back to their default
settings.
CLEAR ODOMETERS
Sets all jukebox odometers back to zero.
