Medium Optical Disk (RW551/RW552) Library
3–22
EK–MOL80–SV. B01
Setting a Security Code
A security code of 0-0-0 is set at the factory. This three-part security code is
required to access any options beneath ADMIN. You should encourage the
customer to change this as soon as possible to avoid access by unauthorized
persons.
1. With
READY
displayed, press
NEXT
until
ADMIN*
appears in the display
window.
NOTE
A three-part security code is required to
access any options beneath ADMIN. The
security code is set to 0,0,0 at the factory, but
you should encourage the customer to
change this as soon as possible to avoid
access by unauthorized persons.
2. Press
ENTER
.
CODE1
and a flashing
0
displays. Press
ENTER
if no security
code has been set, otherwise press
NEXT
until the first number of the security
code displays, and then press
ENTER
. Repeat this step to enter the next two
parts of the security code.
3.
TEST*
displays. Press
NEXT
until
CONFIG*
displays, and then press
ENTER
.
The last configuration in the display will show.
4. Press
NEXT
or
PREV
until
NEW PASSWORD
displays and then press
ENTER
.
5.
NEW1
and a flashing
0
are displayed. Press
NEXT
or
PREV
until the new
number you wish to assign to the first part of the security code is displayed
and then press
ENTER
.
6.
NEW2
and a flashing
0
are displayed. Press
NEXT
or
PREV
until the new
number you wish to assign to the second part of the security code is displayed
and then press
ENTER
.
7.
NEW3
and a flashing
0
are displayed. Press
NEXT
or
PREV
until the new
number you wish to assign to the third part of the security code is displayed
and then press
ENTER
.
8.
IS SET
displays briefly and then
NERW PASSWORD
displays. Press
CANCEL
three times to return to
READY
.
9. Cycle power to the jukebox by switching off the power and then turning it
back on. (Cycling power backs up the new security code so it can be
recovered if the jukebox is powered off for more than 10 days.)
