Medium Optical Disk (RW551/RW552) Library
5–2
EK–MOL80–SV. B01
Field-Replaceable Assemblies
WARNING
DO NOT DISASSEMBLE the optical drive mecha-
nism.
The optical drive mechanism becomes a Class 3B
laser device when disassembled. If the drive is
disassembled, exposure to the invisible laser
beam and hazardous invisible laser radiation
could result in blindness.
NOTE
An optical drive that has been disassembled will
not be accepted as an exchange assembly.
ESD Precautions
The optical disk jukebox contains very sensitive electrical components. It is
EXTREMELY IMPORTANT that you follow the proper procedures for pre-
venting ESD (Electrostatic Discharge). Use wrist-grounding straps, anti-static
mats, and anti-static work stations when removing and replacing the major as-
semblies.
CAUTION
Failure to follow proper procedures could lead to
intermittent failures and/or premature hard failures
in the disk controller and mechanism.
Tools Required
The following tools are needed for assembly/disassembly of the jukebox:
•
Torx® driver with the following bits: T-10, T-15, T-25
•
needle-nosed pliers
•
Pozidriv® magnetized screwdriver
•
flatblade screwdriver
