Chapter 3. Product Configuration and Operation
EK–MOL80–SV. B01
3–13
7. Press CANCEL until READY displays.
NOTE
After an address is changed, the computer
may have to be restarted for the new
addresses to be recognized. The new settings
can be saved to ROM by power cycling the
jukebox. This allows the settings to be
recovered if the jukebox is powered off for
more than 10 days.
CAUTION
Do not switch off power to the jukebox until
you are sure the SCSI bus is inactive.
Removing power from a SCSI peripheral
when the bus is active can result in data loss
and/or indeterminate bus states. (Check the
host system manuals for information about
checking the SCSI bus status.) If the
computer is connected to a LAN, be sure to
check with the system administrator before
shutting off power to the jukebox.
Changing an Optical Drive SCSI Address
NOTE
Because the host computer usually reads a
SCSI IDs on startup, it would be best, for
larger computer systems, to schedule
setting/resetting of SCSI IDs at times when
the host computer will be brought down for
other scheduled reasons.
