Medium Optical Disk (RW551/RW552) Library
2–4
EK–MOL80–SV. B01
b. Place the ramp with the 2 x 2 wood strips facing up onto the pallet
with the holes on the end of the ramp aligning with the two holes in the
pallet.
c. Insert the bolts through these holes. (It is not necessary to tighten these
bolts.)
3. Remove the four wooden blocks located between the pallet and the bottom of
the jukebox cabinet.
4.
Using a 9/16-inch wrench, remove the four hold-down bolts that clamp the
cabinet to the pallet. (The bolt heads are on the bottom surface of the ramp.)
5.
Using a 1/2-inch wrench, ensure that the leveler feet on the cabinet are
raised to their highest position.
WARNING
If the leveler feet are not raised to their highest
position, they may catch on the ramp and cause
the jukebox to tip over.
6. Carefully roll the jukebox down the ramp.
