Chapter 5. Removal and Replacement
EK–MOL80–SV. B01
5–37
Figure 5–45 Controller PCA – Cables Off
5. After replacing the Controller PCA, re-initialize the NVRAM by executing
tests “SET DEFAULTS” & “CLEAR ODOMETERS”. Reference section
“Re-initializing the Jukebox Controller PCA After Service”.
Replacing the Internal SCSI Cable
1.
Follow the steps in the service access procedure at the beginning of this
chapter to remove the rear access panel and right left side access panel.
2.
Remove the SCSI cable.
Follow the procedures in "Replacing the Controller PCA" and "Replacing an
Optical Drive" to access the SCSI cable.
3.
Remove the SCSI cable.
