StarLab GuardOne, User Manual

Page: 44 / 212

44 · GuardOne
®
· Manual 44 · GuardOne
®
· Manual
7.3 Cleaning and Decontamination
Cleaning agents and tissues
To clean the GuardOne® Workstation, use the following cleaning agents and cleaning equipment:
›
lint-free cleaning tissue
› alcohol-based disinfectant
For cleaning, a wipe disinfection with alcohol based disinfectants is recommended.
Further information can be found on the Starlab homepage.
Cleaning interval
The following intervals must be adhered to:
› After each use of the GuardOne® Workstation, carry out the cleaning according to use. Clean the workstation with a recommended
cleaning agent. Depending on the intended use of the GuardOne® Workstation, carry out the decontamination of the PC glass chamber
by the UV lamp.
› In case of a visible contamination, carry out appropriate cleaning.
› To ensure the optimal function of the pre-filter, it is recommended to visually inspect the pre-filter in regular intervals. Exchange it as
soon as it is visibly dirty, latest after a period of 6 months.
Cleaning the outside area of the GuardOne
®
Workstation
Preconditions:
› The recommended cleaning intervals have been observed.
› The GuardOne® Workstation is switched off or disconnected from the power supply.
1. Use a lint-free cleaning tissue to dust off the outer glass chamber of the GuardOne® Workstation.
2. If necessary, gently wipe the outside of the glass chamber with a mild detergent.
Cleaning the touchscreen
Preconditions:
› The recommended cleaning intervals have been observed.
› The GuardOne® Workstation is switched off or disconnected from the power supply.
1. Use a lint-free, slightly damp cleaning tissue to gently wipe the touchscreen.
2 In case of heavy soiling, apply a little alcohol-based detergent to the cleaning tissue.
Gently wipe the touchscreen with the cleaning tissue.