StarLab GuardOne, User Manual

Page: 37 / 212

GuardOne
®
· Manual · 37
English
O
p
e
ra
ti
o
n
/O
p
e
ra
ti
n
g t
h
e D
is
p
la
y A
re
a
Reset
When Reset is pressed, the GuardOne® Workstation is reset to the factory
settings.
Any changes made to screen brightness, LED brightness, quick start
settings, time and date adjustment and backpressure adjustment
are lost. After restoring the factory settings you will also have to
calibrate the touchscreen.
1. Press Reset.
2. Confirm by pressing Reset (1).
The GuardOne® Workstation turns off.
3. To calibrate the touchscreen, press onto the crosses that will subse-
quently appear in the four corners of the touchscreen with a pencil.
The workstation has been reset to factory settings.
To change the factory settings see Chapter 5 “Putting into service”.
Fig. 43: Reset the GuardOne® Workstation