StarLab GuardOne, User Manual

Page: 19 / 212

GuardOne
®
· Manual · 19
English
A
ss
e
m
b
ly
/I
n
st
a
ll
in
g t
h
e P
C S
id
e P
a
n
e
ls
, t
h
e M
u
lt
if
u
n
c
ti
o
n
a
l S
h
e
lf a
n
d t
h
e P
C F
ro
n
t D
o
o
r
4.3 Installing the PC Front Door
Precondition:
› For safety reasons, have a second person available to help.
1. Take the pre-assembled front door element (no. 2) and insert if from
above between the PC left and right side panels. Make sure that the
entire panels slide into the groove of the aluminium profiles. Make
sure that the holes in the aluminium profile and the PC side panels
are aligned on both sides.
2. Use five of the plastic rivets (EVA01) to fix the PC left side panel to
the aluminium profile of the front door assembly. Push the rivets into
the aligned holes.
To avoid any deformation, you can provide additional support to the
aluminium profile with one hand from the inside.
3. Use another five of the plastic rivets (EVA01) to fix the PC right side
panel to the aluminium profile of the front door assembly. Proceed
exactly as in the assembly of the PC left side panel to the front door
detailed in step 2. The front door is installed between the side panels.
Fig. 9: Insert the front door between the side panels
Fig. 10: Fix the front door with plastic rivets