28 · GuardOne
®
· Manual
28 · GuardOne
®
· Manual
Airflow & Light
By pressing Airflow & Light, you can adjust the blower speed or the
LED light at any time during operation.
Precondition:
›
You are on the Home page.
1.
Press Airflow & Light.
Adjusting the Airflow
2.
Press the percentage value (1).
3.
Select the desired airflow rate (2) using the + and - buttons
.
You can choose between 0, 50, 80 and 100 % airflow rate.
Selecting an airflow rate of 0 % will switch off the blower.
To switch it on again, either select an airflow rate above 0 % or
use the Quick Start function on the Home page (“Quick Start and
Quick Stop”).
The Expiration HEPA Filter field (4) provides information about
the remaining life time of the HEPA filter.
4.
Apply the selection using Apply Settings (3).
Your selection is applied immediately.
5.
To exit the page, use Back or Home.
Exiting the page without using Apply Settings will discard all
changes you have made!
Operating the LED light
1.
To switch on/off the LED light, press the LED Light switch (1).
Your selection is applied immediately.
2.
To select an LED light colour, press LED Colour (2).
3.
Select the desired colour. You can choose between normal white
(default) and red (3) by pressing the + and - button
.
Your selection is applied immediately.
4.
To exit the page, use Back or Home.
Fig. 32: Adjust the Airflow
Fig. 33: Operate LED light and colour
Summary of Contents for GuardOne
