StarLab GuardOne, User Manual

Page: 13 / 212

You do not have to reapply previous settings. Previous settings
are retained in the event of a power failure.
GuardOne
®
· Manual · 13
English
S
a
fe
ty
/H
a
za
rd
s w
h
e
n U
se
d a
s I
n
te
n
d
e
d
/ B
e
h
a
v
io
u
r i
n C
a
se o
f E
m
e
rg
e
n
c
y
2.8 Behaviour in Case of Emergency
Behaviour in case of accidents
Preventive measures
› Always be prepared for accidents!
› Keep first aid facilities (first aid kit, blankets etc.) in working order and ready at hand.
› Make sure that the staff is familiar with accident reporting, first aid and rescue facilities.
› Keep access routes free for rescue vehicles.
Measures in case of accidents
› Switch the main power of the GuardOne® Workstation off (Chapter 4.6 “Complete Installation”).
› If there is no danger to your own health, save persons from the danger zone.
› If necessary, initiate first aid measures.
› Alert fire and/or rescue services.
› Inform the person in charge at the location.
› Keep access routes free for rescue vehicles.
› Instruct rescue vehicles.
Behaviour in case of fire outbreak
Preventive measures
› Always be prepared for a fire outbreak!
› Keep first aid facilities (first aid kit, blankets etc.) and firefighting equipment in working order and ready at hand.
› Make sure that the staff is familiar with accident reporting, first aid and rescue facilities.
› Keep access routes free for rescue vehicles.
Measures in case of fire outbreak
› Switch off the main power of the GuardOne® Workstation (Chapter 4.6 “Complete Installation”) and unplug the cable connector.
› If there is no danger to your own health, save persons from the danger zone.
› If necessary, initiate first aid measures.
› Alert fire and/or rescue services.
› If there is no danger to your own health, contain or extinguish the fire using adequate equipment. Continue the fire-fighting until the
arrival of the fire services.
› Inform the person in charge at the location.
› Keep access routes free for rescue vehicles.
› Instruct rescue vehicles.
Behaviour in case of a power failure
Measures after a power failure
1. Turn the main power switch to ON.
2. Continue with your application.