Sony Xperia 1 IV SO-51C, Instruction Manual

Page: 191 / 282

189 Settings
2
[Data warning & limit].
❖
Information
•
Displayed mobile data usage amount is an estimate
and it may be different from the actual one.
- For subscriber of other than ahamo plan
You can check your mobile data usage on My
docomo.
- For subscriber of ahamo plan
You can check your mobile data usage on ahamo
website.
•
Note that you cannot use mobile data
communication if the mobile data usage reaches to
the upper limit.
To resume the mobile data communication, tap
[RESUME] on the notification screen indicating reach
of the upper limit. When the notification indicating
reach of the upper limit does not appear, drag the
status bar down
u [Mobile data limit reached] u Tap
[RESUME].
Setting an access point
An access point for connecting to the
Internet (spmode.ne.jp) is already registered.
You can add or change it if necessary.
For details on sp-mode, refer to NTT
DOCOMO website.
https://www.docomo.ne.jp/service/spmode/
(in Japanese only)
■
Checking the access point in use
1
From the Home screen,
u
[Settings]
u
[Network &
internet]
u
[SIMs].
•
For using a nano SIM card and eSIM at
the same time, the SIM selection screen
appears. Select a SIM to set/confirm.
2
[Access Point Names].
•
The radio button on the right of current
access point is marked.
■
Setting an access point additionally
1
From the Home screen,
u
[Settings]
u
[Network &
internet]
u
[SIMs].
•
For using a nano SIM card and eSIM at
the same time, the SIM selection screen
appears. Select a SIM to set/confirm.
2
[Access Point Names].
Mobile data usage
cycle Set the usage cycle (measuring
period) for mobile data usage.
Set data warning Set whether to display the
notification when the mobile
data usage reaches to the set
warning volume.
Data warning Set a warning value of mobile
data usage.
Set data limit Set whether to disable mobile
data communication when the
mobile data usage reaches to
the limit value.
Data limit Set the limit value of mobile
data usage.