SMC Networks 6152PL2 FICHE, Management Manual

Page: 442 / 818

Command Line Interface
4-64
4
This command sets the severity threshold used to trigger alert messages.
Syntax
logging sendmail level level
level - One of the system message levels (page 4-58). Messages sent
include the selected level down to level 0. (Range: 0-7; Default: 7)
Default Setting
Level 7
Command Mode
Global Configuration
Command Usage
The specified level indicates an event threshold. All events at this level or
higher will be sent to the configured email recipients. (For example, using
Level 7 will report all events from level 7 to level 0.)
Example
This example will send email alerts for system errors from level 4 through 0.
This command sets the email address used for the “From” field in alert messages.
Use the
no form to delete the source email address.
Syntax
[ no ] logging sendmail source-email email-address
email-address - The source email address used in alert messages.
(Range: 0-41 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
You may use an symbolic email address that identifies the switch, or the
address of an administrator responsible for the switch.
Example
This example will set the source email john@acme.com.
Console(config)#logging sendmail level 4
Console(config)#
Console(config)#logging sendmail source-email john@acme.com
Console(config)#