SMC Networks 6152PL2 FICHE, Management Manual

Page: 518 / 818

Command Line Interface
4-140
4
Related Commands
ip ssh crypto host-key generate (4-142)
show ssh (4-144)
ip ssh timeout
This command configures the timeout for the SSH server. Use the no form to restore
the default setting.
Syntax
ip ssh timeout seconds
no ip ssh timeout
seconds – The timeout for client response during SSH negotiation.
(Range: 1-120)
Default Setting
10 seconds
Command Mode
Global Configuration
Command Usage
The timeout specifies the interval the switch will wait for a response from the
client during the SSH negotiation phase. Once an SSH session has been
established, the timeout for user input is controlled by the
exec-timeout
command for vty sessions.
Example
Related Commands
exec-timeout (4-48)
show ip ssh (4-143)
ip ssh authentication-retries
This command configures the number of times the SSH server attempts to
reauthenticate a user. Use the
no form to restore the default setting.
Syntax
ip ssh authentication-retries count
no ip ssh authentication-retries
count – The number of authentication attempts permitted after which the
interface is reset. (Range: 1-5)
Default Setting
3
Console(config)#ip ssh timeout 60
Console(config)#