![background image](http://html.mh-extra.com/html/smc-networks/6152pl2-fiche/6152pl2-fiche_management-manual_1300644763.webp)
Multicast Filtering Commands
4-385
4
•
user
- Display only the user-configured multicast entries.
•
igmp-snooping
- Display only entries learned through IGMP snooping.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Member types displayed include IGMP or USER, depending on selected
options.
Example
The following shows the multicast entries learned through IGMP snooping for
VLAN 1:
(Layer 2)
This section describes commands used to configure Layer 2 IGMP query on the
switch.
This command enables the switch as an IGMP querier. Use the
no
form to disable it.
Syntax
[
no
]
ip igmp snooping querier
Default Setting
Enabled
Console#show mac-address-table multicast vlan 1 igmp-snooping
VLAN M'cast IP addr. Member ports Type
---- --------------- ------------ -------
1 224.1.2.3 Eth1/11 IGMP
Console#
Table 4-95 IGMP Query Commands (Layer 2)
Command
Function
Mode
Page
ip igmp snooping querier
Allows this device to act as the querier for IGMP snooping GC
4-385
ip igmp snooping
query-count
Configures the query count
GC
4-386
ip igmp snooping
query-interval
Configures the query interval
GC
4-387
ip igmp snooping
query-max-response-time
Configures the report delay
GC
4-387
ip igmp snooping
router-port-expire-time
Configures the query timeout
GC
4-388
Summary of Contents for 6152PL2 FICHE
